Codebergdnkl

foot

master
ply5 git calls653 ms37 KiB3 cachedprotocol v2
738 lines22 KiBRaw
1foot(1)
3# NAME
5foot - Wayland terminal emulator
7# SYNOPSIS
9*foot* [_OPTIONS_]++
10*foot* [_OPTIONS_] <_command_> [_COMMAND OPTIONS_]
12All trailing (non-option) arguments are treated as a command, and its
13arguments, to execute (instead of the default shell).
15# DESCRIPTION
17*foot* is a Wayland terminal emulator. Running it without arguments
18will start a new terminal window with your default shell.
20You can override the default shell by appending a custom command to
21the foot command line
23 *foot htop*
25# OPTIONS
27*-c*,*--config*=_PATH_
28 Path to configuration file, see *foot.ini*(5) for details.
30 The configuration file is automatically passed to new terminals
31 spawned via *spawn-terminal* (see *foot.ini*(5)).
33*-C*,*--check-config*
34 Verify configuration and then exit with 0 if ok, otherwise exit
35 with 230 (see *EXIT STATUS*).
37*-o*,*--override*=[_SECTION_.]_KEY_=_VALUE_
38 Override an option set in the configuration file. If _SECTION_ is not
39 given, defaults to _main_.
41*-f*,*--font*=_FONT_
42 Comma separated list of fonts to use, in fontconfig format (see
43 *FONT FORMAT*).
45 The first font is the primary font. The remaining fonts are
46 fallback fonts that will be used whenever a glyph cannot be found
47 in the primary font.
49 The fallback fonts are searched in the order they appear. If a
50 glyph cannot be found in any of the fallback fonts, the dynamic
51 fallback list from fontconfig (for the primary font) is
52 searched.
54 Default: _monospace_.
56*-w*,*--window-size-pixels*=_WIDTHxHEIGHT_
57 Set initial window width and height, in pixels. Default: _700x500_.
59*-W*,*--window-size-chars*=_WIDTHxHEIGHT_
60 Set initial window width and height, in characters. Default: _not set_.
62*-t*,*--term*=_TERM_
63 Value to set the environment variable *TERM* to (see *TERMINFO*
64 and *ENVIRONMENT*). Default: _@default_terminfo@_.
66*-T*,*--title*=_TITLE_
67 Initial window title. Default: _foot_.
69*-a*,*--app-id*=_ID_
70 Value to set the *app-id* property on the Wayland window
71 to. Default: _foot_ (normal mode), or _footclient_ (server mode).
73*--class*=_ID_
74 Alias for *--app-id*.
76*toplevel-tag*=_TAG_
77 Value to set the *toplevel-tag* property on the Wayland window
78 to. The compositor can use this value for session management,
79 window rules etc. Default: _not set_
81*-m*,*--maximized*
82 Start in maximized mode. If both *--maximized* and *--fullscreen*
83 are specified, the _last_ one takes precedence.
85*-F*,*--fullscreen*
86 Start in fullscreen mode. If both *--maximized* and *--fullscreen*
87 are specified, the _last_ one takes precedence.
89*-L*,*--login-shell*
90 Start a login shell, by prepending a '-' to argv[0].
92*--pty*
93 Display an existing pty instead of creating one. This is useful
94 for interacting with VM consoles.
96 This option is not currently supported in combination with
97 *-s*,*--server*.
99*-D*,*--working-directory*=_DIR_
100 Initial working directory for the client application. Default:
101 _CWD of foot_.
103*-s*,*--server*[=_PATH_|_FD_]
104 Run as a server. In this mode, a single foot instance hosts
105 multiple terminals (windows). Use *footclient*(1) to launch new
106 terminals.
108 This saves some memory since for example fonts and glyph caches
109 can be shared between the terminals.
111 It also saves upstart time since the config has already been
112 loaded and parsed, and most importantly, fonts have already been
113 loaded (and their glyph caches are likely to already have been
114 populated).
116 Each terminal will have its own rendering threads, but all Wayland
117 communication, as well as input/output to the shell, is
118 multiplexed in the main thread. Thus, this mode might result in
119 slightly worse performance when multiple terminals are under heavy
120 load.
122 Also be aware that should one terminal crash, it will take all the
123 others with it.
125 The default path is
126 *$XDG\_RUNTIME\_DIR/foot-$WAYLAND\_DISPLAY.sock*.
128 If *$XDG\_RUNTIME\_DIR* is not set, the default path is instead
129 */tmp/foot.sock*.
131 If *$XDG\_RUNTIME\_DIR* is set, but *$WAYLAND\_DISPLAY* is not,
132 the default path is *$XDG\_RUNTIME\_DIR/foot.sock*.
134 Note that if you change the default, you will also need to use the
135 *--server-socket* option in *footclient*(1) and point it to your
136 custom socket path.
138 If the argument is a number, foot will interpret it as the file descriptor
139 of a socket provided by a supervision daemon (such as systemd or s6), and
140 use that socket as it's own.
142 Two systemd units (foot-server.{service,socket}) are provided to use that
143 feature with systemd. To use socket activation, only enable the
144 socket unit.
146 Note that starting *foot --server* as a systemd service will use
147 the environment of the systemd user instance; thus, you'll need
148 to import *$WAYLAND_DISPLAY* in it using *systemctl --user
149 import-environment WAYLAND_DISPLAY*.
151*-H*,*--hold*
152 Remain open after child process exits.
154*-p*,*--print-pid*=_FILE_|_FD_
155 Print PID to this file, or FD, when successfully started. The file
156 (or FD) is closed immediately after writing the PID. When a _FILE_
157 as been specified, the file is unlinked at exit.
159 This option can only be used in combination with *-s*,*--server*.
161*-d*,*--log-level*={*info*,*warning*,*error*,*none*}
162 Log level, used both for log output on stderr as well as
163 syslog. Default: _warning_.
165*-l*,*--log-colorize*=[{*never*,*always*,*auto*}]
166 Enables or disables colorization of log output on stderr. Default:
167 _auto_.
169*-S*,*--log-no-syslog*
170 Disables syslog logging. Logging is only done on stderr. This
171 option can only be used in combination with *-s*,*--server*.
173*-v*,*--version*
174 Show the version number and quit.
176*-e*
177 Ignored; for compatibility with *xterm -e*.
179 This option was added in response to several program launchers
180 passing *-e* to arbitrary terminals, under the assumption that
181 they all implement the same semantics for it as *xterm*(1).
182 Ignoring it allows foot to be invoked as e.g. *foot -e man foot*
183 with the same results as with xterm, instead of producing an
184 "invalid option" error.
186# KEYBOARD SHORTCUTS
188The following keyboard shortcuts are available by default. They can be
189changed in *foot.ini*(5). There are also more actions (disabled by
190default) available; see *foot.ini*(5).
192## NORMAL MODE
194*shift*+*page up*/*page down*
195 Scroll up/down in history
197*ctrl*+*shift*+*c*, *XF86Copy*
198 Copy selected text to the _clipboard_
200*ctrl*+*shift*+*v*, *XF86Paste*
201 Paste from _clipboard_
203*shift*+*insert*
204 Paste from the _primary selection_
206*ctrl*+*shift*+*r*
207 Start a scrollback search
209*ctrl*+*+*, *ctrl*+*=*
210 Increase font size
212*ctrl*+*-*
213 Decrease font size
215*ctrl*+*0*
216 Reset font size
218*ctrl*+*shift*+*n*
219 Spawn a new terminal. If the shell has been configured to emit the
220 _OSC 7_ escape sequence, the new terminal will start in the
221 current working directory.
223*ctrl*+*shift*+*o*
224 Activate URL mode, allowing you to "launch" URLs.
226*ctrl*+*shift*+*u*
227 Activate Unicode input.
229*ctrl*+*shift*+*z*
230 Jump to the previous, currently not visible, prompt. Requires
231 shell integration.
233*ctrl*+*shift*+*x*
234 Jump to the next prompt. Requires shell integration.
236## SCROLLBACK SEARCH
238These keyboard shortcuts affect the search selection:
240*ctrl*+*r*
241 Search _backward_ for the next match. If the search string is
242 empty, the last searched-for string is used.
244*ctrl*+*s*
245 Search _forward_ for the next match. If the search string is
246 empty, the last searched-for string is used.
248*shift*+*right*
249 Extend current selection to the right by one character.
251*shift*+*left*
252 Extend current selection to the left by one character.
254*ctrl*+*w*, *ctrl*+*shift*+*right*
255 Extend current selection (and thus the search criteria) to the end
256 of the word, or the next word if currently at a word separating
257 character.
259*ctrl*+*shift*+*w*
260 Same as *ctrl*+*w*, except that the only word separating
261 characters are whitespace characters.
263*ctrl*+*shift*+*left*
264 Extend current selection to the left to the last word boundary.
266*shift*+*down*
267 Extend current selection down one line
269*shift*+*up*
270 Extend current selection up one line.
272*ctrl*+*v*, *ctrl*+*shift*+*v*, *ctrl*+*y*, *XF86Paste*
273 Paste from clipboard into the search buffer.
275*shift*+*insert*
276 Paste from primary selection into the search buffer.
278*escape*, *ctrl*+*g*, *ctrl*+*c*
279 Cancel the search
281*return*
282 Finish the search and copy the current match to the primary
283 selection. The terminal selection is kept, allowing you to press
284 *ctrl*+*shift*+*c* to copy it to the clipboard.
286These shortcuts affect the search box in scrollback-search mode:
288*ctrl*+*b*
289 Moves the cursor in the search box one **character** to the left.
291*ctrl*+*left*, *alt*+*b*
292 Moves the cursor in the search box one **word** to the left.
294*ctrl*+*f*
295 Moves the cursor in the search box one **character** to the right.
297*ctrl*+*right*, *alt*+*f*
298 Moves the cursor in the search box one **word** to the right.
300*Home*, *ctrl*+*a*
301 Moves the cursor in the search box to the beginning of the input.
303*End*, *ctrl*+*e*
304 Moves the cursor in the search box to the end of the input.
306*alt*+*backspace*, *ctrl*+*backspace*
307 Deletes the **word before** the cursor.
309*alt*+*delete*, *ctrl*+*delete*
310 Deletes the **word after** the cursor.
312*ctrl*+*u*
313 Deletes from the cursor to the start of the input
315*ctrl*+*k*
316 Deletes from the cursor to the end of the input
318These shortcuts affect scrolling in scrollback-search mode:
320*shift*+*page-up*
321 Scrolls up/back one page in history.
323*shift*+*page-down*
324 Scroll down/forward one page in history.
326## URL MODE
328*t*
329 Toggle URL visibility in jump label.
331*escape*, *ctrl*+*g*, *ctrl*+*c*, *ctrl*+*d*
332 Exit URL mode without launching a URL.
334## MOUSE SHORTCUTS
336*left*, single-click
337 Drag to select; when released, the selected text is copied to the
338 _primary_ selection. This feature is normally *disabled* whenever
339 the client has enabled _mouse tracking_, but can be forced by
340 holding *shift*.
342 Holding *ctrl* will create a block selection.
344*left*, double-click
345 Selects the _word_ (separated by spaces, period, comma,
346 parenthesis etc) under the pointer. Hold *ctrl* to select
347 everything under the pointer up to, and until, the next space
348 characters.
350*left*, triple-click
351 Selects the everything between enclosing quotes, or the entire row
352 if not inside a quote.
354*left*, quad-click
355 Selects the entire row
357*middle*
358 Paste from the _primary_ selection
360*right*
361 Extend current selection. Clicking immediately extends the
362 selection, while hold-and-drag allows you to interactively resize
363 the selection.
365*ctrl*+*right*
366 Extend the current selection, but force it to be character wise,
367 rather than depending on the original selection mode.
369*wheel*
370 Scroll up/down in history
372*ctrl*+*wheel*
373 Increase/decrease font size
375## TOUCHSCREEN
377*tap*
378 Emulates mouse left button click.
380*drag*
381 Scrolls up/down in history.
383 Holding for a while before dragging (time delay can be configured)
384 emulates mouse dragging with left button held.
387# FONT FORMAT
389The font is specified in FontConfig syntax. That is, a colon-separated
390list of font name and font options.
392_Examples_:
393- Dina:weight=bold:slant=italic
394- Courier New:size=12
396# URLs
398Foot supports URL detection. But, unlike many other terminal
399emulators, where URLs are highlighted when they are hovered and opened
400by clicking on them, foot uses a keyboard driven approach.
402Pressing *ctrl*+*shift*+*o* enters _"Open URL mode"_, where all currently
403visible URLs are underlined, and is associated with a
404_"jump-label"_. The jump-label indicates the _key sequence_
405(e.g. *"AF"*) to use to activate the URL.
407The key binding can, of course, be customized, like all other key
408bindings in foot. See *show-urls-launch* and *show-urls-copy* in
409*foot.ini*(5).
411*show-urls-launch* by default opens the URL with *xdg-open*. This can
412be changed with the *url-launch* option.
414*show-urls-copy* is an alternative to *show-urls-launch*, that changes
415what activating a URL _does_; instead of opening it, it copies it to
416the clipboard. It is unbound by default.
418Jump label colors, the URL underline color, and the letters used in
419the jump label key sequences can be configured.
421# ALT/META CHARACTERS
423By default, foot prefixes meta characters with *ESC*. This corresponds
424to XTerm's *metaSendsEscape* option set to *true*.
426This can be disabled programmatically with *\E[?1036l* (and enabled
427again with *\E[?1036h*).
429When disabled, foot will instead set the 8:th bit of meta character
430and then UTF-8 encode it. This corresponds to XTerm's *eightBitMeta*
431option set to *true*.
433This can also be disabled programmatically with *rmm* (Reset Meta Mode,
434*\E[?1034l*), and enabled again with *smm* (Set Meta Mode,
435*\E[?1034h*).
437# BACKSPACE
439Foot transmits DEL (*^?*) on backspace. This corresponds to XTerm's
440*backarrowKey* option set to *false*, and to DECBKM being _reset_.
442To instead transmit BS (*^H*), press *ctrl*+*backspace*.
444Note that foot does *not* implement DECBKM, and that the behavior
445described above *cannot* be changed.
447Finally, pressing *alt* will prefix the transmitted byte with ESC.
449# KEYPAD
451By default, *Num Lock* overrides the run-time configuration keypad
452mode; when active, the keypad is always considered to be in
453_numerical_ mode. This corresponds to XTerm's *numLock* option set to
454*true*.
456In this mode, the keypad keys always sends either numbers (Num Lock is
457active) or cursor movement keys (up, down, left, right, page up, page
458down etc).
460This can be disabled programmatically with *\E[?1035l* (and enabled
461again with *\E[?1035h*).
463When disabled, the keypad sends custom escape sequences instead of
464numbers, when in _application_ mode.
466# CONFIGURATION
468foot will search for a configuration file in the following locations,
469in this order:
471 - *XDG_CONFIG_HOME/foot/foot.ini* (defaulting to
472 *$HOME/.config/foot/foot.ini* if unset)
473 - *XDG_CONFIG_DIRS/foot/foot.ini* (defaulting to
474 */etc/xdg/foot/foot.ini* if unset)
476An example configuration file containing all options with their default value
477commented out will usually be installed to */etc/xdg/foot/foot.ini*.
479For more information, see *foot.ini*(5).
481# SHELL INTEGRATION
483## Current working directory
485New foot terminal instances (bound to *ctrl*+*shift*+*n* by default)
486will open in the current working directory, if the shell in the
487"parent" terminal reports directory changes.
489This is done with the OSC-7 escape sequence. Most shells can be
490scripted to do this, if they do not support it natively. See the wiki
491(https://codeberg.org/dnkl/foot/wiki#user-content-spawning-new-terminal-instances-in-the-current-working-directory)
492for details.
495## Jumping between prompts
497Foot can move the current viewport to focus prompts of already
498executed commands (bound to *ctrl*+*shift*+*z*/*x* by default).
500For this to work, the shell needs to emit an OSC-133;A
501(*\\E]133;A\\E\\\\*) sequence before each prompt.
503In zsh, one way to do this is to add a _precmd_ hook:
505 *precmd() {
506 print -Pn "\\e]133;A\\e\\\\"
507 }*
509See the wiki
510(https://codeberg.org/dnkl/foot/wiki#user-content-jumping-between-prompts)
511for details, and examples for other shells.
513## Piping last command's output
515The key binding *pipe-command-output* can pipe the last command's
516output to an application of your choice (similar to the other
517*pipe-\** key bindings):
519 *\[key-bindings\]++
520pipe-command-output=[sh -c "f=$(mktemp); cat - > $f; footclient emacsclient -nw $f; rm $f"] Control+Shift+g*
522When pressing *ctrl*+*shift*+*g*, the last command's output is written
523to a temporary file, then an emacsclient is started in a new
524footclient instance. The temporary file is removed after the
525footclient instance has closed.
527For this to work, the shell must emit an OSC-133;C (*\\E]133;C\\E\\\\*)
528sequence before command output starts, and an OSC-133;D
529(*\\E]133;D\\E\\\\*) when the command output ends.
531In fish, one way to do this is to add _preexec_ and _postexec_ hooks:
533 *function foot_cmd_start --on-event fish_preexec
534 echo -en "\\e]133;C\\e\\\\"
535 end*
537 *function foot_cmd_end --on-event fish_postexec
538 echo -en "\\e]133;D\\e\\\\"
539 end*
541See the wiki
542(https://codeberg.org/dnkl/foot/wiki#user-content-piping-last-commands-output)
543for details, and examples for other shells
545# TERMINFO
547Client applications use the terminfo identifier specified by the
548environment variable *TERM* (set by foot) to determine terminal
549capabilities.
551Foot has two terminfo definitions: *foot* and *foot-direct*, with
552*foot* being the default.
554The difference between the two is in the number of colors they
555describe; *foot* describes 256 colors and *foot-direct* 16.7 million
556colors (24-bit truecolor).
558Note that using the *foot* terminfo does not limit the number of
559usable colors to 256; applications can still use 24-bit RGB colors. In
560fact, most applications work best with *foot* (including 24-bit
561colors). Using *\*-direct* terminfo entries has been known to crash
562some ncurses applications even.
564There are however applications that need a *\*-direct* terminfo entry
565for 24-bit support. Emacs is one such example.
567While using either *foot* or *foot-direct* is strongly recommended, it
568is possible to use e.g. *xterm-256color* as well. This can be useful
569when remoting to a system where foot's terminfo entries cannot easily
570be installed.
572Note that terminfo entries can be installed in the user's home
573directory. I.e. if you do not have root access, or if there is no
574distro package for foot's terminfo entries, you can install foot's
575terminfo entries manually, by copying *foot* and *foot-direct* to
576*~/.terminfo/f/*.
578# XTGETTCAP
580*XTGETTCAP* is an escape sequence initially introduced by XTerm, and
581also implemented (and extended, to some degree) by Kitty.
583It allows querying the terminal for terminfo classic, file-based,
584terminfo definition. For example, if all applications used this
585feature, you would no longer have to install foot's terminfo on remote
586hosts you SSH into.
588XTerm's implementation (as of XTerm-370) only supports querying key
589(as in keyboard keys) capabilities, and three custom capabilities:
591- TN - terminal name
592- Co - number of colors (alias for the colors capability)
593- RGB - number of bits per color channel (different semantics from
594 the RGB capability in file-based terminfo definitions!).
596Kitty has extended this, and also supports querying all integer and
597string capabilities.
599Foot supports this, and extends it even further, to also include
600boolean capabilities. This means foot's entire terminfo can be queried
601via *XTGETTCAP*.
603Note that both Kitty and foot handles responses to multi-capability
604queries slightly differently, compared to XTerm.
606XTerm will send a single DCS reply, with ;-separated
607capability/value pairs. There are a couple of issues with this:
609- The success/fail flag in the beginning of the response is always 1
610 (success), unless the very first queried capability is invalid.
611- XTerm will not respond at all to an invalid capability, unless it's
612 the first one in the XTGETTCAP query.
613- XTerm will end the response at the first invalid capability.
615In other words, if you send a large multi-capability query, you will
616only get responses up to, but not including, the first invalid
617capability. All subsequent capabilities will be dropped.
619Kitty and foot on the other hand, send one DCS response for each
620capability in the multi query. This allows us to send a proper
621success/fail flag for each queried capability. Responses for all
622queried capabilities are always sent. No queries are ever dropped.
624# EXIT STATUS
626Foot will exit with code 230 if there is a failure in foot itself.
628In all other cases, the exit code is that of the client application
629(i.e. the shell).
631# ENVIRONMENT
633## Variables used by foot
635*SHELL*
636 The default child process to run, when no _command_ argument is
637 specified and the *shell* option in *foot.ini*(5) is not set.
639*HOME*
640 Used to determine the location of the configuration file, see
641 *foot.ini*(5) for details.
643*XDG\_CONFIG\_HOME*
644 Used to determine the location of the configuration file, see
645 *foot.ini*(5) for details.
647*XDG\_CONFIG\_DIRS*
648 Used to determine the location of the configuration file, see
649 *foot.ini*(5) for details.
651*XDG\_RUNTIME\_DIR*
652 Used to construct the default _PATH_ for the *--server*
653 option, when no explicit argument is given (see above).
655*WAYLAND\_DISPLAY*
656 Used to construct the default _PATH_ for the *--server*
657 option, when no explicit argument is given (see above).
659*XCURSOR\_THEME*
660 The name of the *Xcursor*(3) theme to use for pointers (typically
661 set by the Wayland compositor).
663*XCURSOR\_SIZE*
664 The size to use for *Xcursor*(3) pointers (typically set by the
665 Wayland compositor).
667## Variables set in the child process
669*TERM*
670 terminfo/termcap identifier. This is used by client applications
671 to determine which capabilities a terminal supports. The value is
672 set according to either the *--term* command-line option or the
673 *term* config option in *foot.ini*(5).
675*COLORTERM*
676 This variable is set to *truecolor*, to indicate to client
677 applications that 24-bit RGB colors are supported.
679*PWD*
680 Current working directory (at the time of launching foot)
682*SHELL*
683 Set to the launched shell, if the shell is valid (it is listed in
684 */etc/shells*).
686In addition to the variables listed above, custom environment
687variables may be defined in *foot.ini*(5).
689## Variables *unset* in the child process
691*TERM_PROGRAM*
692*TERM_PROGRAM_VERSION*
693 These environment variables are set by certain other terminal
694 emulators. We unset them, to prevent applications from
695 misdetecting foot.
697In addition to the variables listed above, custom environment
698variables to unset may be defined in *foot.ini*(5).
700# Signals
702The following signals have special meaning in foot:
704- SIGUSR1: switch to the dark color theme (*[colors-dark]*).
705- SIGUSR2: switch to the light color theme (*[colors-light]*).
707Note: you can send SIGUSR1/SIGUSR2 to a *foot --server* process too,
708in which case all client instances will switch theme. Furthermore, all
709future client instances will also use the selected theme.
711You can also send SIGUSR1/SIGUSR2 to a footclient instance, see
712*footclient*(1) for details.
715# BUGS
717Please report bugs to https://codeberg.org/dnkl/foot/issues
719Before you open a new issue, please search existing bug reports, both
720open and closed ones. Chances are someone else has already reported
721the same issue.
723The report should contain the following:
725- Foot version (*foot --version*).
726- Log output from foot (run *foot -d info* from another terminal).
727- Which Wayland compositor (and version) you are running.
728- If reporting a crash, please try to provide a *bt full* backtrace
729 with symbols.
730- Steps to reproduce. The more details the better.
732# IRC
734\#foot on irc.libera.chat
736# SEE ALSO
738*foot.ini*(5), *footclient*(1)
Diagnostics5 git calls · 653 ms
CallStatusSizeTime0653 ms
discover200178 B4 ms
git.upload-pack discover
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=4
git.response.bytes=178
git.server.agent=git/2.56.1-Linux
git.server.object_format=sha1
git.server.caps=agent ls-refs fetch server-option object-format
git.server.fetch=shallow wait-for-done filter
git.protocol.version=2
git.pkt.frames=9
git.pkt.data=7
git.pkt.flush=2
git.pkt.delim=0
git.pkt.bytes=178
git.pkt.payload.max=35
ls-refs20010 KiB633 ms
git.upload-pack ls-refs
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=584
git.response.bytes=10322
git.response.cache=EXPIRED
git.response.duration_ms=633
git.protocol.version=2
git.pkt.frames=108
git.pkt.data=107
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=10322
git.pkt.payload.max=106
git.ls_refs.count=107
git.ls_refs.head=refs/heads/master
fetchcombine:blob:none+tree:2 · deepen 12008.6 KiB · hit2 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=3
git.response.bytes=8830
git.response.cache=HIT
git.response.duration_ms=2
git.fetch.filter=combine:blob:none+tree:2
git.fetch.wants=c0d2c3e95d74cb60526ff28aec9f34ee3df545e0
git.fetch.haves.count=0
git.fetch.deepen=1
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=7
git.pkt.data=5
git.pkt.flush=1
git.pkt.delim=1
git.pkt.bytes=8830
git.pkt.payload.max=8730
git.sideband.band1.bytes=8730
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0
git.pack.objects=14
git.pack.bytes=8730
git.fetch.wide.objects=14
git.fetch.wide.extra_bytes=9909
git.fetch.wide.blobs=0
fetchtree:0 · deepen 102009.3 KiB · hit3 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=2
git.response.bytes=9489
git.response.cache=HIT
git.response.duration_ms=3
git.fetch.filter=tree:0
git.fetch.wants=c0d2c3e95d74cb60526ff28aec9f34ee3df545e0
git.fetch.haves.count=0
git.fetch.deepen=10
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=7
git.pkt.data=5
git.pkt.flush=1
git.pkt.delim=1
git.pkt.bytes=9489
git.pkt.payload.max=9389
git.sideband.band1.bytes=9389
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0
git.pack.objects=10
git.pack.bytes=9389
git.pack.ofs_delta=0
git.pack.ref_delta=0
git.pack.chain.max=0
git.pack.trailer=de930681b6073ba5b599a0f956bfbd114762ad5a
git.pack.full=10
Open pack map
fetch2008.4 KiB · hit17 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=17
git.response.bytes=8562
git.response.cache=HIT
git.response.duration_ms=17
git.fetch.wants=24d81b5f8be46c814cd01b11d6f8496914b08334
git.fetch.haves.count=0
git.fetch.deepen=0
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=4
git.pkt.data=3
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=8562
git.pkt.payload.max=8535
git.sideband.band1.bytes=8535
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0

Each row is one HTTP round trip ply made to the git server for this page, on one timeline. discover asks what the server speaks, ls-refs lists branch tips, fetch brings objects by id. A hit was served by Workers Cache. Tap a row for its wire details.

Remote
https://codeberg.org/dnkl/foot
Ref
refs/heads/master
Commit
c0d2c3e95d74cb60526ff28aec9f34ee3df545e0
cf-ray
a5e2fa3a9ada90c0
Request
65bcf875…
Protocol
v2 · sha1
Agent
git/2.56.1-Linux
Filter
advertised
Fetch
shallow wait-for-done filter
Capabilities
agent ls-refs fetch server-option object-format