Artifactspublic-v0

curl

master
ply4 git calls42 ms288 KiB3 cachedprotocol v2
106 lines2.4 KiBRaw

NAME

CURLOPT_USE_SSL - request using SSL / TLS for the transfer

SYNOPSIS

c
#include <curl/curl.h>

CURLcode curl_easy_setopt(CURL *handle, CURLOPT_USE_SSL, long level);

DESCRIPTION

Pass a long using one of the values from below, to make libcurl use your desired level of SSL for the transfer.

These are all protocols that start out plain text and get "upgraded" to SSL using the STARTTLS command.

This is for enabling SSL/TLS when you use FTP, SMTP, POP3, IMAP etc.

CURLUSESSL_NONE

Do not attempt to use SSL.

CURLUSESSL_TRY

Try using SSL, proceed as normal otherwise. Note that server may close the connection if the negotiation fails. This level is insecure and should be avoided since it allows the connection to remain unprotected.

CURLUSESSL_CONTROL

Require SSL for the control connection or fail with CURLE_USE_SSL_FAILED. This level is partially insecure and should be avoided since it lets the data connection remain unprotected.

This level is meant for FTP, since that is the only protocol with separate connections for control and data. If used for IMAP, POP3 or SMTP it equals CURLUSESSL_ALL.

CURLUSESSL_ALL

Require SSL for all communication or fail with CURLE_USE_SSL_FAILED.

DEFAULT

CURLUSESSL_NONE

%PROTOCOLS%

EXAMPLE

c
int main(void)
{
  CURL *curl = curl_easy_init();
  if(curl) {
    CURLcode result;
    curl_easy_setopt(curl, CURLOPT_URL, "ftp://example.com/dir/file.ext");

    /* require use of SSL for this, or fail */
    curl_easy_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_ALL);

    /* Perform the request */
    result = curl_easy_perform(curl);
    curl_easy_cleanup(curl);
  }
}

HISTORY

This option was known as CURLOPT_FTP_SSL up to 7.16.4. Supported by LDAP since 7.81.0. Fully supported by the OpenLDAP backend only.

CURLUSESSL_* enums became long types in 8.13.0, prior to this version a long cast was necessary when passed to curl_easy_setopt(3).

%AVAILABILITY%

RETURN VALUE

curl_easy_setopt(3) returns a CURLcode indicating success or error.

CURLE_OK (0) means everything was OK, non-zero means an error occurred, see libcurl-errors(3).

1---
2c: Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
3SPDX-License-Identifier: curl
4Title: CURLOPT_USE_SSL
5Section: 3
6Source: libcurl
7See-also:
8 - CURLOPT_PROXY_SSLVERSION (3)
9 - CURLOPT_SSLVERSION (3)
10 - CURLOPT_SSL_OPTIONS (3)
11Protocol:
12 - FTP
13 - SMTP
14 - POP3
15 - IMAP
16Added-in: 7.17.0
17---
19# NAME
21CURLOPT_USE_SSL - request using SSL / TLS for the transfer
23# SYNOPSIS
25~~~c
26#include <curl/curl.h>
28CURLcode curl_easy_setopt(CURL *handle, CURLOPT_USE_SSL, long level);
29~~~
31# DESCRIPTION
33Pass a long using one of the values from below, to make libcurl use your
34desired *level* of SSL for the transfer.
36These are all protocols that start out plain text and get "upgraded" to SSL
37using the STARTTLS command.
39This is for enabling SSL/TLS when you use FTP, SMTP, POP3, IMAP etc.
41## CURLUSESSL_NONE
43Do not attempt to use SSL.
45## CURLUSESSL_TRY
47Try using SSL, proceed as normal otherwise. Note that server may close the
48connection if the negotiation fails. This level is *insecure* and should be
49avoided since it allows the connection to remain unprotected.
51## CURLUSESSL_CONTROL
53Require SSL for the control connection or fail with *CURLE_USE_SSL_FAILED*.
54This level is partially *insecure* and should be avoided since it lets the
55data connection remain unprotected.
57This level is meant for FTP, since that is the only protocol with separate
58connections for control and data. If used for IMAP, POP3 or SMTP it equals
59`CURLUSESSL_ALL`.
61## CURLUSESSL_ALL
63Require SSL for all communication or fail with *CURLE_USE_SSL_FAILED*.
65# DEFAULT
67CURLUSESSL_NONE
69# %PROTOCOLS%
71# EXAMPLE
73~~~c
74int main(void)
76 CURL *curl = curl_easy_init();
77 if(curl) {
78 CURLcode result;
79 curl_easy_setopt(curl, CURLOPT_URL, "ftp://example.com/dir/file.ext");
81 /* require use of SSL for this, or fail */
82 curl_easy_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_ALL);
84 /* Perform the request */
85 result = curl_easy_perform(curl);
86 curl_easy_cleanup(curl);
87 }
89~~~
91# HISTORY
93This option was known as CURLOPT_FTP_SSL up to 7.16.4. Supported by LDAP since
947.81.0. Fully supported by the OpenLDAP backend only.
96**CURLUSESSL_*** enums became `long` types in 8.13.0, prior to this version
97a `long` cast was necessary when passed to curl_easy_setopt(3).
99# %AVAILABILITY%
101# RETURN VALUE
103curl_easy_setopt(3) returns a CURLcode indicating success or error.
105CURLE_OK (0) means everything was OK, non-zero means an error occurred, see
106libcurl-errors(3).
Diagnostics4 git calls · 42 ms
CallStatusSizeTime042 ms
discover200152 B2 ms
git.upload-pack discover
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=2
git.response.bytes=152
git.server.agent=gitty/1.0
git.server.object_format=sha1
git.server.caps=agent ls-refs fetch object-format
git.server.fetch=shallow filter sideband-all
git.protocol.version=2
git.pkt.frames=8
git.pkt.data=6
git.pkt.flush=2
git.pkt.delim=0
git.pkt.bytes=152
git.pkt.payload.max=34
ls-refs200149 B · hit3 ms
git.upload-pack ls-refs
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=3
git.response.bytes=149
git.response.cache=HIT
git.response.duration_ms=3
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=149
git.pkt.payload.max=78
git.ls_refs.count=2
git.ls_refs.head=refs/heads/master
fetchblob:none · deepen 10200287 KiB · hit2 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=2
git.response.bytes=293470
git.response.cache=HIT
git.response.duration_ms=2
git.fetch.filter=blob:none
git.fetch.filter.requested=tree:0
git.fetch.filter.fallback=blob:none
git.fetch.filter.learned=false
git.fetch.wants=31c911efe5652725e930f4d2e60c9060e5f6646d
git.fetch.haves.count=0
git.fetch.deepen=10
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=10
git.pkt.data=8
git.pkt.flush=1
git.pkt.delim=1
git.pkt.bytes=293470
git.pkt.payload.max=65516
git.sideband.band1.bytes=293354
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0
git.pack.objects=87
git.pack.bytes=293354
git.pack.ofs_delta=0
git.pack.ref_delta=1
git.pack.chain.max=1
git.pack.trailer=6a646bcda6740bab42e321b51998b52ea15146c0
git.pack.full=86
Open pack map
fetch2001.3 KiB · hit37 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=37
git.response.bytes=1317
git.response.cache=HIT
git.response.duration_ms=37
git.fetch.wants=03b03df5df7a1f160ca29616fe3565527edf7aa0
git.fetch.haves.count=0
git.fetch.deepen=0
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=1317
git.pkt.payload.max=1296
git.sideband.band1.bytes=1295
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0

Each row is one HTTP round trip ply made to the git server for this page, on one timeline. discover asks what the server speaks, ls-refs lists branch tips, fetch brings objects by id. A hit was served by Workers Cache. Tap a row for its wire details.

Remote
https://5ad2236b39de4c8bd8f6270ea63f3ea9.artifacts.cloudflare.net/git/public-v0/curl.git
Ref
refs/heads/master
Commit
31c911efe5652725e930f4d2e60c9060e5f6646d
cf-ray
a5e359aa7892dfff
Request
457d4acc…
Protocol
v2 · sha1
Agent
gitty/1.0
Filter
advertised
Fetch
shallow filter sideband-all
Capabilities
agent ls-refs fetch object-format