Artifactspublic-v0

curl

master
ply4 git calls111 ms288 KiB2 cachedprotocol v2
92 lines2.4 KiBRaw

NAME

CURLOPT_CONNECTTIMEOUT_MS - timeout for the connect phase

SYNOPSIS

c
#include <curl/curl.h>

CURLcode curl_easy_setopt(CURL *handle, CURLOPT_CONNECTTIMEOUT_MS,
                          long timeout);

DESCRIPTION

Pass a long. It sets the maximum time in milliseconds that you allow the connection phase to take. This timeout only limits the connection phase, it has no impact once libcurl has connected. The connection phase includes the name resolve (DNS) and all protocol handshakes and negotiations until there is an established connection with the remote side.

Set this option to zero to switch to the default built-in connection timeout - 300 seconds. See also the CURLOPT_TIMEOUT_MS(3) option.

CURLOPT_CONNECTTIMEOUT(3) is the same function but set in seconds.

If both CURLOPT_CONNECTTIMEOUT(3) and CURLOPT_CONNECTTIMEOUT_MS(3) are set, the value set last is used.

The connection timeout is included in the general all-covering CURLOPT_TIMEOUT_MS(3):

With CURLOPT_CONNECTTIMEOUT_MS(3) set to 3000 and CURLOPT_TIMEOUT_MS(3) set to 5000, the operation can never last longer than 5000 milliseconds, and the connection phase cannot last longer than 3000 milliseconds.

With CURLOPT_CONNECTTIMEOUT_MS(3) set to 4000 and CURLOPT_TIMEOUT_MS(3) set to 2000, the operation can never last longer than 2000 milliseconds. Including the connection phase.

This option may cause libcurl to use the SIGALRM signal to timeout system calls on builds not using asynch DNS. In Unix-like systems, this might cause signals to be used unless CURLOPT_NOSIGNAL(3) is set.

DEFAULT

300000

%PROTOCOLS%

EXAMPLE

c
int main(void)
{
  CURL *curl = curl_easy_init();
  if(curl) {
    CURLcode result;
    curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");

    /* complete connection within 10000 milliseconds */
    curl_easy_setopt(curl, CURLOPT_CONNECTTIMEOUT_MS, 10000L);

    result = curl_easy_perform(curl);
    curl_easy_cleanup(curl);
  }
}

%AVAILABILITY%

RETURN VALUE

curl_easy_setopt(3) returns a CURLcode indicating success or error.

CURLE_OK (0) means everything was OK, non-zero means an error occurred, see libcurl-errors(3).

1---
2c: Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
3SPDX-License-Identifier: curl
4Title: CURLOPT_CONNECTTIMEOUT_MS
5Section: 3
6Source: libcurl
7See-also:
8 - CURLOPT_LOW_SPEED_LIMIT (3)
9 - CURLOPT_MAX_RECV_SPEED_LARGE (3)
10 - CURLOPT_TIMEOUT_MS (3)
11Protocol:
12 - All
13Added-in: 7.16.2
14---
16# NAME
18CURLOPT_CONNECTTIMEOUT_MS - timeout for the connect phase
20# SYNOPSIS
22~~~c
23#include <curl/curl.h>
25CURLcode curl_easy_setopt(CURL *handle, CURLOPT_CONNECTTIMEOUT_MS,
26 long timeout);
27~~~
29# DESCRIPTION
31Pass a long. It sets the maximum time in milliseconds that you allow the
32connection phase to take. This timeout only limits the connection phase, it
33has no impact once libcurl has connected. The connection phase includes the
34name resolve (DNS) and all protocol handshakes and negotiations until there is
35an established connection with the remote side.
37Set this option to zero to switch to the default built-in connection timeout -
38300 seconds. See also the CURLOPT_TIMEOUT_MS(3) option.
40CURLOPT_CONNECTTIMEOUT(3) is the same function but set in seconds.
42If both CURLOPT_CONNECTTIMEOUT(3) and CURLOPT_CONNECTTIMEOUT_MS(3) are set,
43the value set last is used.
45The connection timeout is included in the general all-covering
46CURLOPT_TIMEOUT_MS(3):
48With CURLOPT_CONNECTTIMEOUT_MS(3) set to 3000 and CURLOPT_TIMEOUT_MS(3) set to
495000, the operation can never last longer than 5000 milliseconds, and the
50connection phase cannot last longer than 3000 milliseconds.
52With CURLOPT_CONNECTTIMEOUT_MS(3) set to 4000 and CURLOPT_TIMEOUT_MS(3) set to
532000, the operation can never last longer than 2000 milliseconds. Including
54the connection phase.
56This option may cause libcurl to use the SIGALRM signal to timeout system
57calls on builds not using asynch DNS. In Unix-like systems, this might cause
58signals to be used unless CURLOPT_NOSIGNAL(3) is set.
60# DEFAULT
62300000
64# %PROTOCOLS%
66# EXAMPLE
68~~~c
69int main(void)
71 CURL *curl = curl_easy_init();
72 if(curl) {
73 CURLcode result;
74 curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");
76 /* complete connection within 10000 milliseconds */
77 curl_easy_setopt(curl, CURLOPT_CONNECTTIMEOUT_MS, 10000L);
79 result = curl_easy_perform(curl);
80 curl_easy_cleanup(curl);
81 }
83~~~
85# %AVAILABILITY%
87# RETURN VALUE
89curl_easy_setopt(3) returns a CURLcode indicating success or error.
91CURLE_OK (0) means everything was OK, non-zero means an error occurred, see
92libcurl-errors(3).
Diagnostics4 git calls · 111 ms
CallStatusSizeTime0111 ms
discover200152 B2 ms
git.upload-pack discover
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=2
git.response.bytes=152
git.server.agent=gitty/1.0
git.server.object_format=sha1
git.server.caps=agent ls-refs fetch object-format
git.server.fetch=shallow filter sideband-all
git.protocol.version=2
git.pkt.frames=8
git.pkt.data=6
git.pkt.flush=2
git.pkt.delim=0
git.pkt.bytes=152
git.pkt.payload.max=34
ls-refs200149 B · hit3 ms
git.upload-pack ls-refs
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=3
git.response.bytes=149
git.response.cache=HIT
git.response.duration_ms=3
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=149
git.pkt.payload.max=78
git.ls_refs.count=2
git.ls_refs.head=refs/heads/master
fetchblob:none · deepen 10200287 KiB · hit2 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=2
git.response.bytes=293470
git.response.cache=HIT
git.response.duration_ms=2
git.fetch.filter=blob:none
git.fetch.filter.requested=tree:0
git.fetch.filter.fallback=blob:none
git.fetch.filter.learned=false
git.fetch.wants=31c911efe5652725e930f4d2e60c9060e5f6646d
git.fetch.haves.count=0
git.fetch.deepen=10
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=10
git.pkt.data=8
git.pkt.flush=1
git.pkt.delim=1
git.pkt.bytes=293470
git.pkt.payload.max=65516
git.sideband.band1.bytes=293354
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0
git.pack.objects=87
git.pack.bytes=293354
git.pack.ofs_delta=0
git.pack.ref_delta=1
git.pack.chain.max=1
git.pack.trailer=6a646bcda6740bab42e321b51998b52ea15146c0
git.pack.full=86
Open pack map
fetch2001.2 KiB106 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=106
git.response.bytes=1213
git.response.cache=MISS
git.response.duration_ms=106
git.fetch.wants=e619e94507bef732aeeb7fc88fb50cf2ed2b2c36
git.fetch.haves.count=0
git.fetch.deepen=0
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=1213
git.pkt.payload.max=1192
git.sideband.band1.bytes=1191
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0

Each row is one HTTP round trip ply made to the git server for this page, on one timeline. discover asks what the server speaks, ls-refs lists branch tips, fetch brings objects by id. A hit was served by Workers Cache. Tap a row for its wire details.

Remote
https://5ad2236b39de4c8bd8f6270ea63f3ea9.artifacts.cloudflare.net/git/public-v0/curl.git
Ref
refs/heads/master
Commit
31c911efe5652725e930f4d2e60c9060e5f6646d
cf-ray
a5e31364a9f43e6e
Request
6b150b7d…
Protocol
v2 · sha1
Agent
gitty/1.0
Filter
advertised
Fetch
shallow filter sideband-all
Capabilities
agent ls-refs fetch object-format