Artifactspublic-v0

curl

master
ply4 git calls134 ms288 KiB2 cachedprotocol v2
91 lines2.3 KiBRaw

NAME

CURLOPT_CONNECTTIMEOUT - timeout for the connect phase

SYNOPSIS

c
#include <curl/curl.h>

CURLcode curl_easy_setopt(CURL *handle, CURLOPT_CONNECTTIMEOUT, long timeout);

DESCRIPTION

Pass a long. It sets the maximum time in seconds that you allow the connection phase to take. This timeout only limits the connection phase, it has no impact once libcurl has connected. The connection phase includes the name resolve (DNS) and all protocol handshakes and negotiations until there is an established connection with the remote side.

Set this option to zero to switch to the default built-in connection timeout - 300 seconds. See also the CURLOPT_TIMEOUT(3) option.

CURLOPT_CONNECTTIMEOUT_MS(3) is the same function but set in milliseconds.

If both CURLOPT_CONNECTTIMEOUT(3) and CURLOPT_CONNECTTIMEOUT_MS(3) are set, the value set last is used.

The connection timeout is included in the general all-covering CURLOPT_TIMEOUT(3):

With CURLOPT_CONNECTTIMEOUT(3) set to 3 and CURLOPT_TIMEOUT(3) set to 5, the operation can never last longer than 5 seconds, and the connection phase cannot last longer than 3 seconds.

With CURLOPT_CONNECTTIMEOUT(3) set to 4 and CURLOPT_TIMEOUT(3) set to 2, the operation can never last longer than 2 seconds. Including the connection phase.

This option may cause libcurl to use the SIGALRM signal to timeout system calls on builds not using asynch DNS. In Unix-like systems, this might cause signals to be used unless CURLOPT_NOSIGNAL(3) is set.

DEFAULT

300

%PROTOCOLS%

EXAMPLE

c
int main(void)
{
  CURL *curl = curl_easy_init();
  if(curl) {
    CURLcode result;
    curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");

    /* complete connection within 10 seconds */
    curl_easy_setopt(curl, CURLOPT_CONNECTTIMEOUT, 10L);

    result = curl_easy_perform(curl);
    curl_easy_cleanup(curl);
  }
}

%AVAILABILITY%

RETURN VALUE

curl_easy_setopt(3) returns a CURLcode indicating success or error.

CURLE_OK (0) means everything was OK, non-zero means an error occurred, see libcurl-errors(3).

1---
2c: Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
3SPDX-License-Identifier: curl
4Title: CURLOPT_CONNECTTIMEOUT
5Section: 3
6Source: libcurl
7See-also:
8 - CURLOPT_LOW_SPEED_LIMIT (3)
9 - CURLOPT_MAX_RECV_SPEED_LARGE (3)
10 - CURLOPT_TIMEOUT (3)
11Protocol:
12 - All
13Added-in: 7.7
14---
16# NAME
18CURLOPT_CONNECTTIMEOUT - timeout for the connect phase
20# SYNOPSIS
22~~~c
23#include <curl/curl.h>
25CURLcode curl_easy_setopt(CURL *handle, CURLOPT_CONNECTTIMEOUT, long timeout);
26~~~
28# DESCRIPTION
30Pass a long. It sets the maximum time in seconds that you allow the connection
31phase to take. This timeout only limits the connection phase, it has no impact
32once libcurl has connected. The connection phase includes the name resolve
33(DNS) and all protocol handshakes and negotiations until there is an
34established connection with the remote side.
36Set this option to zero to switch to the default built-in connection timeout -
37300 seconds. See also the CURLOPT_TIMEOUT(3) option.
39CURLOPT_CONNECTTIMEOUT_MS(3) is the same function but set in milliseconds.
41If both CURLOPT_CONNECTTIMEOUT(3) and CURLOPT_CONNECTTIMEOUT_MS(3)
42are set, the value set last is used.
44The connection timeout is included in the general all-covering
45CURLOPT_TIMEOUT(3):
47With CURLOPT_CONNECTTIMEOUT(3) set to 3 and CURLOPT_TIMEOUT(3) set
48to 5, the operation can never last longer than 5 seconds, and the connection
49phase cannot last longer than 3 seconds.
51With CURLOPT_CONNECTTIMEOUT(3) set to 4 and CURLOPT_TIMEOUT(3) set
52to 2, the operation can never last longer than 2 seconds. Including the
53connection phase.
55This option may cause libcurl to use the SIGALRM signal to timeout system
56calls on builds not using asynch DNS. In Unix-like systems, this might cause
57signals to be used unless CURLOPT_NOSIGNAL(3) is set.
59# DEFAULT
61300
63# %PROTOCOLS%
65# EXAMPLE
67~~~c
68int main(void)
70 CURL *curl = curl_easy_init();
71 if(curl) {
72 CURLcode result;
73 curl_easy_setopt(curl, CURLOPT_URL, "https://example.com");
75 /* complete connection within 10 seconds */
76 curl_easy_setopt(curl, CURLOPT_CONNECTTIMEOUT, 10L);
78 result = curl_easy_perform(curl);
79 curl_easy_cleanup(curl);
80 }
82~~~
84# %AVAILABILITY%
86# RETURN VALUE
88curl_easy_setopt(3) returns a CURLcode indicating success or error.
90CURLE_OK (0) means everything was OK, non-zero means an error occurred, see
91libcurl-errors(3).
Diagnostics4 git calls · 134 ms
CallStatusSizeTime0134 ms
discover200152 B2 ms
git.upload-pack discover
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=2
git.response.bytes=152
git.server.agent=gitty/1.0
git.server.object_format=sha1
git.server.caps=agent ls-refs fetch object-format
git.server.fetch=shallow filter sideband-all
git.protocol.version=2
git.pkt.frames=8
git.pkt.data=6
git.pkt.flush=2
git.pkt.delim=0
git.pkt.bytes=152
git.pkt.payload.max=34
ls-refs200149 B · hit2 ms
git.upload-pack ls-refs
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=2
git.response.bytes=149
git.response.cache=HIT
git.response.duration_ms=2
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=149
git.pkt.payload.max=78
git.ls_refs.count=2
git.ls_refs.head=refs/heads/master
fetchblob:none · deepen 10200287 KiB · hit3 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=3
git.response.bytes=293470
git.response.cache=HIT
git.response.duration_ms=3
git.fetch.filter=blob:none
git.fetch.filter.requested=tree:0
git.fetch.filter.fallback=blob:none
git.fetch.filter.learned=false
git.fetch.wants=31c911efe5652725e930f4d2e60c9060e5f6646d
git.fetch.haves.count=0
git.fetch.deepen=10
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=10
git.pkt.data=8
git.pkt.flush=1
git.pkt.delim=1
git.pkt.bytes=293470
git.pkt.payload.max=65516
git.sideband.band1.bytes=293354
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0
git.pack.objects=87
git.pack.bytes=293354
git.pack.ofs_delta=0
git.pack.ref_delta=1
git.pack.chain.max=1
git.pack.trailer=6a646bcda6740bab42e321b51998b52ea15146c0
git.pack.full=86
Open pack map
fetch2001.2 KiB129 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=129
git.response.bytes=1200
git.response.cache=MISS
git.response.duration_ms=129
git.fetch.wants=65a98b315dba3d47c04ae752735772f1d7d68abb
git.fetch.haves.count=0
git.fetch.deepen=0
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=1200
git.pkt.payload.max=1179
git.sideband.band1.bytes=1178
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0

Each row is one HTTP round trip ply made to the git server for this page, on one timeline. discover asks what the server speaks, ls-refs lists branch tips, fetch brings objects by id. A hit was served by Workers Cache. Tap a row for its wire details.

Remote
https://5ad2236b39de4c8bd8f6270ea63f3ea9.artifacts.cloudflare.net/git/public-v0/curl.git
Ref
refs/heads/master
Commit
31c911efe5652725e930f4d2e60c9060e5f6646d
cf-ray
a5e312f859e43e6e
Request
0b007a9f…
Protocol
v2 · sha1
Agent
gitty/1.0
Filter
advertised
Fetch
shallow filter sideband-all
Capabilities
agent ls-refs fetch object-format