Artifactspublic-v0

curl

master
ply4 git calls27 ms288 KiB3 cachedprotocol v2
51 lines1.5 KiBRaw

--ftp-port

Reverse the default initiator/listener roles when connecting with FTP. This option makes curl use active mode. curl then commands the server to connect back to the client's specified address and port, while passive mode asks the server to setup an IP address and port for it to connect to. <address> should be one of:

interface

e.g. eth0 to specify which interface's IP address you want to use (Unix only)

IP address

e.g. 192.168.10.1 to specify the exact IP address

hostname

e.g. my.host.domain to specify the machine

-

make curl pick the same IP address that is already used for the control connection. This is the recommended choice.

Disable the use of PORT with --ftp-pasv. Disable the attempt to use the EPRT command instead of PORT by using --disable-eprt. EPRT is really PORT++.

You can also append ":[start]-[end]" to the right of the address, to tell curl what TCP port range to use. That means you specify a port range, from a lower to a higher number. A single number works as well, but do note that it increases the risk of failure since the port may not be available. (Added in 7.19.5)

1---
2c: Copyright (C) Daniel Stenberg, <daniel@haxx.se>, et al.
3SPDX-License-Identifier: curl
4Long: ftp-port
5Arg: <address>
6Help: Send PORT instead of PASV
7Short: P
8Protocols: FTP
9Category: ftp
10Added: 4.0
11Multi: single
12See-also:
13 - ftp-pasv
14 - disable-eprt
15Example:
16 - -P - ftp:/example.com
17 - -P eth0 ftp:/example.com
18 - -P 192.168.0.2 ftp:/example.com
19---
21# `--ftp-port`
23Reverse the default initiator/listener roles when connecting with FTP. This
24option makes curl use active mode. curl then commands the server to connect
25back to the client's specified address and port, while passive mode asks the
26server to setup an IP address and port for it to connect to. \<address\>
27should be one of:
29## interface
30e.g. **eth0** to specify which interface's IP address you want to use (Unix only)
32## IP address
33e.g. **192.168.10.1** to specify the exact IP address
35## hostname
36e.g. **my.host.domain** to specify the machine
38## -
39make curl pick the same IP address that is already used for the control
40connection. This is the recommended choice.
42##
44Disable the use of PORT with --ftp-pasv. Disable the attempt to use the EPRT
45command instead of PORT by using --disable-eprt. EPRT is really PORT++.
47You can also append ":[start]-[end]" to the right of the address, to tell
48curl what TCP port range to use. That means you specify a port range, from a
49lower to a higher number. A single number works as well, but do note that it
50increases the risk of failure since the port may not be available.
51(Added in 7.19.5)
Diagnostics4 git calls · 27 ms
CallStatusSizeTime027 ms
discover200152 B3 ms
git.upload-pack discover
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=3
git.response.bytes=152
git.server.agent=gitty/1.0
git.server.object_format=sha1
git.server.caps=agent ls-refs fetch object-format
git.server.fetch=shallow filter sideband-all
git.protocol.version=2
git.pkt.frames=8
git.pkt.data=6
git.pkt.flush=2
git.pkt.delim=0
git.pkt.bytes=152
git.pkt.payload.max=34
ls-refs200149 B · hit3 ms
git.upload-pack ls-refs
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=ls-refs
git.upstream.dur_ms=3
git.response.bytes=149
git.response.cache=HIT
git.response.duration_ms=3
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=149
git.pkt.payload.max=78
git.ls_refs.count=2
git.ls_refs.head=refs/heads/master
fetchblob:none · deepen 10200287 KiB · hit3 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=3
git.response.bytes=293470
git.response.cache=HIT
git.response.duration_ms=3
git.fetch.filter=blob:none
git.fetch.filter.requested=tree:0
git.fetch.filter.fallback=blob:none
git.fetch.filter.learned=false
git.fetch.wants=31c911efe5652725e930f4d2e60c9060e5f6646d
git.fetch.haves.count=0
git.fetch.deepen=10
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=10
git.pkt.data=8
git.pkt.flush=1
git.pkt.delim=1
git.pkt.bytes=293470
git.pkt.payload.max=65516
git.sideband.band1.bytes=293354
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0
git.pack.objects=87
git.pack.bytes=293354
git.pack.ofs_delta=0
git.pack.ref_delta=1
git.pack.chain.max=1
git.pack.trailer=6a646bcda6740bab42e321b51998b52ea15146c0
git.pack.full=86
Open pack map
fetch200879 B · hit21 ms
git.upload-pack fetch
http.response.status_code=200
git.upstream.cf_ray=-
git.upstream.phase=fetch
git.upstream.dur_ms=21
git.response.bytes=879
git.response.cache=HIT
git.response.duration_ms=21
git.fetch.wants=28cc34ba2f0b30efbcb37955cd4b51c4df9fc41c
git.fetch.haves.count=0
git.fetch.deepen=0
git.fetch.thin_pack=false
git.fetch.ofs_delta=true
git.protocol.version=2
git.pkt.frames=3
git.pkt.data=2
git.pkt.flush=1
git.pkt.delim=0
git.pkt.bytes=879
git.pkt.payload.max=858
git.sideband.band1.bytes=857
git.sideband.band2.bytes=0
git.sideband.band3.bytes=0

Each row is one HTTP round trip ply made to the git server for this page, on one timeline. discover asks what the server speaks, ls-refs lists branch tips, fetch brings objects by id. A hit was served by Workers Cache. Tap a row for its wire details.

Remote
https://5ad2236b39de4c8bd8f6270ea63f3ea9.artifacts.cloudflare.net/git/public-v0/curl.git
Ref
refs/heads/master
Commit
31c911efe5652725e930f4d2e60c9060e5f6646d
cf-ray
a5e357723c712c38
Request
b850ca69…
Protocol
v2 · sha1
Agent
gitty/1.0
Filter
advertised
Fetch
shallow filter sideband-all
Capabilities
agent ls-refs fetch object-format